We offer Dynamic Fittings in our state of the art Fitting Center.
Iron Fitting - Driver Fitting - Driver Analysis - Fairway Wood Fitting - Hybrid Fitting - Ball Fitting - Putter Fitting - Iron Analysis -
The answer to the question "why should I get custom fit?" is really very simple. It's the reason every player on every tour plays with custom equipment. Properly fit equipment allows you to perform your best. And as much as modern day golfers would like to take credit for this we are a little late. It's been going on forever.
Why every Player of all skill levels can benefit from custom fit golf equipment!
One of the most common misconceptions about custom fitting of golf clubs is that middle and high handicap golfers are convinced they are “not good enough to be custom fit.” The vast majority of middle to higher handicap believe, they should improve the swing before being custom fit. The reason is that majority of average to higher handicap golfers believe they are not consistent enough in their swing to be able to gain benefit from custom fitting. What’s interesting about that mistaken belief is that one of the reasons they are inconsistent is because the standard made, “off-the-wall” golf clubs they bought and use are built to specs that make it much more difficult for them to become consistent! Here’s an absolute fact about custom fitting – the less skilled the golfer, the more they need to be properly fit to play to the best of their ability. Low handicap golfers achieve their better playing ability because of two reasons – one, they were taught proper swing fundamentals and put in the time to practice and ingrain those swing skills, and two, they are good athletes blessed with good hand-eye coordination and natural athletic ability, which enables them to train their body to develop the proper swing fundamentals. Because of their natural ability and coordination, most low handicap golfers could play almost as well with golf equipment not fit to them. Most don’t because in the process of becoming a good player, they develop a better sense of feel and ball flight tendencies that leads them to custom fitting to ensure greater consistency. On the other hand, most middle and high handicap golfers do not have the same level of athletic ability or control over their swing. Certainly with enough monitored practice many of these golfers could improve their swing skills. But the vast majority will not achieve the same level of swing control and constincency as the low handicap players because they simply are not blessed with above average athletic ability. Because of that, if the middle to high handicap player ends up with woods that are too long, a wood face angle that is not matched to their swing path, a swingweight and total weight in their clubs that is not matched to their swing tempo, strength, and several other custom fitting parameters, they cannot possibly play to the best of their ability. Thus it is extremely important for middle to high handicap golfers to be accurately custom fit so that the clubs can be made to help overcome and offset many of their inherent swing faults.
The following are some of the custom fitting parameters that are extremely important for middle to high handicap players to investigate in order to get the most out of their games.
Club Length
Hitting the ball more consistently on-center is THE most important key to playing better golf. The length of your club is one of the most critical fitting parameters that can change the success or failure rate of hitting the ball solid and on-center. Unfortunately the “standard lengths” of drivers and fairway woods that most golfers buy are too long to allow the vast majority of golfers, especially middle and higher handicappers, to achieve theirhighest on-center hit percentage. Thus it is of UTMOST IMPORTANCE that middle and high handicap players areproperly fit for the right length which will result in their ability to control the clubs, and from that, increase their percentage of solid, on-center hits. The key for proper length fitting starts with a wrist to floor measurement which is a general recommendation and will change with issues such as set up and physical limitations.
Iron Lie Angles
No golfer, regardless of handicap or athletic ability, can hit the ball straight without the lie angle of each iron properly fit to their swing. Fitting the lie angle of the irons to each individual golf swing so every iron arrives at impact with the sole parallel to the ground is the only way the clubhead can come into impact and assure a straight ball flight. If all golfers were the same height, had the same arm length and swung the club through impact the same exact way, then the standard lie angles designed on clubs bought “off the wall” would be fine. But that is definitely not the case, so if golfers want to eliminate the inevitability of an improperly fit lie angle causing errant shots, every golfer must be custom fit for the lie angle of the irons - every golfer.
Driver and wood Face Angle
Good players have trained their swing to deliver the clubface square to the ball a very high percentage of the time. Thus, the square face angle of the standard made woods sold today is an acceptable fit for the better golfer. Middle and high handicap golfers typically cannot deliver the clubface square to the ball nearly as often as can a low handicap player. Thus hooks, but far more often slices, are a frequent if not constant companion of the middle and high handicap golfers when they play. Well over 90% of all golfers with misdirection problems using their woods do tend to hit the ball to one side of the fairway far more than the other. Custom fitting the face angle of the woods will offset this misdirection tendency and allow the middle to high handicap golfer to keep the ball in play a much higher percentage of the time.
Driver and Wood Loft
Most golfers are not playing with enough loft on their driver to fully maximize their distance off the tee, that goes for fairway woods as well. The majority of average golfers wold benefit from having a driver loft of 12, 13 or 14 degrees which will allow them to achieve the launch angle that will keep the ball airborne long enough to carry the ball as far as your swing speed will allow. At last check, 12 degrees is the highest loft the majority of the standard clubmaking companies even offer for men and 13.5 is the average starting loft for women. That’s a pretty good indication that to get more distance off the tee, you need to be custom fit for the loft of your driver. See the following for a very general recommendation of driver loft vs. swing speed.
The reason for the ranges in loft for each swing speed is because your swing angle of attack affects the final loft recommendation.
Recommended Driver Swing Speed - Driver Loft
50 mph 15 - 17 degrees
60 mph 14 - 16 degrees
70 mph 13 - 15 degrees
80 mph 12 - 14 degrees
90 mph 11 - 13 degrees
100 mph 9.5 - 11.5 degrees
110 mph 8 - 10 degrees
Shaft Flex and Bend Profile
If there is one area in which the better player can gain a little more advantage in a fitting than the middle to higher handicap player, it is in the selection of the right shaft flex and shaft bend profile (the design of the shaft’s stiffness over the entire length of the shaft). This is because better players usually have a more refined sense of feel for the bending action of the shaft during the swing than do middle to higher handicap golfers. However, it is true that if any golfer uses a shaft that is too stiff for their swing speed and swing mechanics, they will suffer from a lower launch angle, loss of distance, and a poor feeling of impact. Thus, it becomes very important for middle and high handicap golfers to also be properly fit to the correct shaft weight and shaft bend profile (overall flex design).
Grip Size
The grip size is a key element in allowing all golfers to be able to feel as comfortable as possible holding on to the club. And from that, to be able to keep the tension in the hands and the forearms at a minimum from the address position to the execution of the swing. Because middle to high handicap golfers often grip the club too tight, fitting these players with a grip size that is more comfortable is a very important way for them to learn that grip tension is a very destructive factor in making consistent swings.
Clubhead Center of Gravity
Middle and higher handicap golfers will always be more consistent in their shotmaking if they use clubheads in which the center of gravity is located as far back from the face as possible. Most less skilled golfers think only of choosing clubheads with a low center of gravity. However, it is the rear location of the CG that has more influence over how high you hit the ball for any given loft on the face. In addition, woodheads with a more rear located CG are more forgiving for off-center hits because the head tends to twist less when the CG is much farther back from the face.
Using our state of the art fitting center we can properly fit Players of any skill level so they can play their best with custom fit golf equipment!
